# This is a custom firmware for Human Presence Sensor 1U
# https://screek.tech

esphome:
  name: screek-humen-sensor-1u
  comment: Screek Human Presence Sensor 1U
  friendly_name: Screek Human Presence Sensor 1U
  name_add_mac_suffix: True
  platformio_options:
    board_build.flash_mode: dio
    board_build.f_cpu: 80000000L
  on_boot:
    priority: 900
    then:
       lambda: |-
        // id(wake_up_reason) = esp_sleep_get_wakeup_cause();
        id(cpu_speed) = ESP.getCpuFreqMHz() ;
  project: 
    name: Screek.Human_Presence_Sensor
    version: 1U
  min_version: 2023.6.1

globals:
   - id: cpu_speed
     type: int
     restore_value: no
     initial_value: '0'

external_components:
  # - source: github://screek-workshop/custom_components_support_for_screek_1u
  - source:
      type: git
      url: https://github.com/screek-workshop/custom_components_support_for_screek_1u
      ref: master
    # components: [ ld2410, uart ]

esp32:
  board: lolin_s2_mini
  framework:
    type: arduino
    version: 2.0.9
    platform_version: 6.3.2

improv_serial:

logger:
  hardware_uart: uart0

api:
  # encryption:
    # key: "YOUR-API-PASSWORD"

ota:
  # This won't work for the original firmware(we use diffrent ota password),
  # so if you want to turn it into your own OTA, 
  # make sure to completely flash your custom yaml in the firmware once.
  # after that, you may always ota with your own password.
  password: "all-things-in-their-being-are-good-for-something" # words by Socrates

# By automatically importing to the console, 
# subsequent adjustments can be easily made without having to manually fix a specific name.
# dashboard_import:
#  package_import_url: github://screekworkshop/screek-human-sensor/1u/yaml/Screek-Humen-Dectet-1u.yaml@2023.06
#  import_full_config: True

wifi:
  # power_save_mode: NONE
  output_power: 15dB
  power_save_mode: LIGHT
  reboot_timeout: 10min
  ap:
    ssid: "SCREEK HUMAN-SENSOR"
    # password: "YOUR-AP-PASSWORD"

captive_portal:

web_server:
  port: 80

binary_sensor:
  - platform: status
    name: Online
    id: ink_ha_connected
  - platform: ld2410
    has_target:
      name: Presence
    has_moving_target:
      name: Moving Target
    has_still_target:
      name: Still Target

sensor:
  - platform: template
    name: "ESP Cpu Speed"
    accuracy_decimals: 0
    unit_of_measurement: Mhz
    lambda: |-
      return (id(cpu_speed));
    entity_category: "diagnostic"

  # - platform: internal_temperature
  #   id: sys_esp_temperature
  #   name: ESP Temperature
  #   unit_of_measurement: °C
  #   device_class: TEMPERATURE
  #   update_interval: 1s
  #   entity_category: "diagnostic"

  - platform: template
    id: sys_esp_temperature
    name: ESP Temperature
    lambda: return temperatureRead();
    unit_of_measurement: °C
    device_class: TEMPERATURE
    update_interval: 30s
    entity_category: "diagnostic"

  - platform: uptime
    name: Uptime
    id: sys_uptime
    update_interval: 60s

  - platform: wifi_signal 
    name: RSSI
    id: wifi_signal_db
    update_interval: 60s
    entity_category: "diagnostic"

  - platform: template
    id: esp_memory
    icon: mdi:memory
    name: ESP Free Memory
    lambda: return heap_caps_get_free_size(MALLOC_CAP_INTERNAL) / 1024;
    unit_of_measurement: 'kB'
    state_class: measurement
    entity_category: "diagnostic"
    update_interval: 60s
  - platform: ld2410
    moving_distance:
      name : Moving Distance
      id: moving_distance
    still_distance:
      name: Still Distance
      id: still_distance
    moving_energy:
      name: Move Energy
    still_energy:
      name: Still Energy
    detection_distance:
      name: Detection Distance
    light:
      name: Sun Light

light:
  - platform: status_led
    name: sys_status
    pin: GPIO15
    internal: True
    restore_mode: ALWAYS_OFF

time:
  - platform: sntp
    id: time_sntp

uart:
  id: uart_ld2410
  tx_pin: GPIO18
  rx_pin: GPIO33
  baud_rate: 256000
  parity: NONE
  stop_bits: 1

ld2410:
  timeout: 150s
  id: ld2410_radar

button:
  - platform: template
    name: "Enable LD2410 BLE"
    # disabled_by_default: True
    entity_category: "config"
    icon: mdi:bluetooth
    on_press:
      lambda: |-
        id(ld2410_radar) -> ble_control(true);

  - platform: template
    name: "Disable LD2410 BLE"
    # disabled_by_default: True
    entity_category: "config"
    icon: mdi:bluetooth-off
    on_press:
      lambda: |-
        id(ld2410_radar) -> ble_control(false);

  - platform: template
    name: "LD2410 Reboot"
    icon: mdi:radar
    entity_category: "config"
    on_press:
      lambda: |-
        // auto* radar = LD2410Component::get(ld2410); 
        // radar -> roboot();
        id(ld2410_radar) -> reboot();

  - platform: restart
    icon: mdi:power-cycle
    name: "ESP Reboot"

  - platform: factory_reset
    disabled_by_default: True
    name: Factory Reset
    id: factory_reset_all